—

• PhD in Mechanical Engineering from VIT-AP University, Amaravati.
  PhD Thesis: Investigation of fluid elastic instability and vortex shedding infinned tube array subjected to cross flow.
• M.E. in CAD/CAM/CAE from Rajarambapu institute of Technology, Sakharale in 2013.
  M.E. Thesis : Optimisation of car rim using optistruct.
• B.E. in Mechanical Engineering from Dr. J.J. Magdum College of Engineering,
  Jaysingpur (Shivaji University, Kolhapur) in 2009.

• Vice Principal & Associate Professor in Department of Basic Science and Humanitites of Vasantdada Patil Pratishthan’s College of Engineering and Visual Arts, Sion, Mumbai, from July 2023 to Till date.
• Associate Professor in Department of Mechanical Engineering of Sharad Institute of Technology College of Engineering, Yadrav from April 2023 to July 2023.
• Assistant Professor in Department of Mechanical Engineering of Sharad Institute of Technology College of Engineering, Yadrav from June 2013 to March 2023.
• Lecturer in Department of Mechanical Engineering of Sharad Institute of Technology polytechnic, Yadrav from June 2010 to May 2013.
• Supervisor in Sanmati Industries, Hatkanangle from August 2009 to June 2010.

• Vibration
• Structural Vibration
• Fluid structure interaction: flow induced vibration
• Composite material
• Generative design using Fusion 360
• Outcome Based Education

1. Publications in Peer Reviewed Journals 1. Yadav, Pravin H., Desai, S. R., & Mohanty, D. K. (2022). “Investigation on vibration parameters in aluminum finned tube arrays subjected to water cross flow.” Multidiscipline Modeling in Materials and Structures, 18(5), 808–825. https://doi.org/10.1108/MMMS-05-2022-0093 (SCIE- Impact factor 2.65)
2. Yadav, Pravin H., & Mohanty, D. K. (2021), “Effect of material on fluid elastic instability of parallel triangular tube array subjected to water cross.” Materials Today: Proceedings, 46, 8668–8674. https://doi.org/10.1016/j.matpr.2021.03.673 (Scopus- CiteScore 2.3)
3. Yadav, Pravin H, & Mohanty, D. kumar. (2021). “Experimental Studies On The Effect of Fin Geometry on Fluid elastic Instability of Parallel Triangular Finned Tube Array.” International Journal of Fluid Mechanics Research, 48(4), 1–15. https://doi.org/10.1615/InterJFluidMechRes.2021038618 (ESCI, Scopus- CiteScore 1.8)
4. Yadav, Pravin Hindurao, Desai, S. R., & Mohanty, D. K. (2023). “Fluid elastic instability and vortex shedding in finned tube arrays: the effects of tube material and fin density.” World Journal of Engineering. https://doi.org/10.1108/WJE-05-2022-0215 (ESCI, Scopus- CiteScore 2.4)
5. Yadav, Pravin Hindurao, & Mohanty, D. kumar. (2021). “Fluid elastic instability and vortex induced vibration parameters in finned tube arrays with P/D ratio 1.79.” World Journal of Engineering, ahead-of-p(ahead-of-print). https://doi.org/10.1108/WJE-05- 2021-0260 (ESCI, Scopus- CiteScore 2.4)
6. Yadav Pravin H, & Mohanty, D. K. (2021). “Investigation of Natural Frequency and Damping Ratio Due to Flow-Induced Vibration in a Finned Tube Subjected to Cross-Flow.” International Review of Mechanical Engineering (IREME)of Mechanical, 15(3), 133–140. https://doi.org/https://doi.org/10.15866/ireme.v15i3.19716 (Scopus- CiteScore 2.1)
7. Desai, A. A., Dnyandev Patil, S., Yadav, P. H., & Kekare, A. (2022). “Design, Analysis, and Development of Additive Manufacturing by using FDM Technique with Dual Nozzle Assembly.” Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.11.010 (Scopus- CiteScore 2.3 )
8. Patil, M. A., Patil, S. D., Yadav, P. H., & Desai, A. A. (2022). “Methoding and Defect Minimization of Center Plate Casting by Auto-CASTX1 Software.” Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.11.286 (Scopus- CiteScore 2.3 )
9. Patil, S. D., Hatte, P., Khan, S. N., Desai, A. A., & Yadav, P. H. (2022). “Analyzing the Design Parameters and Their Influence on the Tensile Strength of Composite Layers using Taguchi Technique.” Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.11.276 (Scopus- CiteScore 2.3 )
10. Yadav, P. H., & Ramdasi, P. G. (2012). “Optimization of Car Rim Using OptiStruct.” IOSR Journal of Environmental Science, Toxicology and Food Technology, 2(3), 10–15. https://doi.org/10.9790/2402-0231015

2. Publications in Conferences 1. Yadav P.H & Desai A. A. (2017) “Analysis of Effect of Fiber Orientation and Stacking Sequence on Bending Strength of I- Section Composite Beam”, 2nd International Conference on recent challenges in Engineering and Technology (ICRCET -17), February 23-24, Sharad Institute of Technology College of Engineering, Yadrav, India.
2. Yadav, Pravin H., & Mohanty, D. K. (2021), “Effect of material on fluid elastic instability of parallel triangular tube array subjected to water cross”, 3rd International Conference on Materials, Manufacturing and Modelling, March 19–21, Vellore Institute of Technology, Vellore.
3. Desai, A. A., Dnyandev Patil, S., Yadav, P. H., & Kekare, A. (2022). “Design, Analysis, and Development of Additive Manufacturing by using FDM Technique with Dual Nozzle Assembly.” International Conference On Innovation In Mechanical And Civil Engineering ( i-MACE 2022), August 26-27
4. Patil, M. A., Patil, S. D., Yadav, P. H., & Desai, A. A. (2022). “Methoding and Defect Minimization of Center Plate Casting by Auto-CASTX1 Software.” International Conference On Innovation In Mechanical And Civil Engineering ( i-MACE 2022), August 26-27
5. Patil, S. D., Hatte, P., Khan, S. N., Desai, A. A., & Yadav, P. H. (2022). “Analyzing the Design Parameters and Their Influence on the Tensile Strength of Composite Layers using Taguchi Technique.” International Conference On Innovation In Mechanical And Civil Engineering ( i-MACE 2022), August 26-27
6. Kekare A.S., Yadav P.H., Patil K.K., & Mohanty D.K. (2023), “Effect of material on critical speed of rotor system on varying load.” Second International Conference on Advances in Mechanical Engineering and Material Sciences (ICAMEMS 2023), April 20-23

3. Patents 1. Granted Australian Innovation Patent of “Intelligent Structure System to Assist Physically Challenged Persons”. Patent No: 2021100046, 10th March 2021.
2. Filled Indian Patent on “Automatic moisture control system for vermin-compost bed.” Application no. 202321019081, 21st March 2023.

4. Consultancy 1. Vibration testing support for Mr. Kedar K. Patil (PhD Scholar Shivaji University, Kolhapur) Amount: 15,000/-
2. Vibration testing consultancy for Eibenstock Positron Elektroworks, Tardal Amount: Work under Process.
3. Vibration testing consultancy for Green Edge Agro Industries, Gokul shirgaon. Amount: 25,000/-

5. Funding 1. Received Rs.30,000/- funding for project from GOSHIMA (Gokul shirgaon Industries Manufacturing Association)

• Awarded with Best Teacher in faculty with more than 10 years experiance for Year 2022- 23 by SITCOE, Yadrav.
• Awarded with Best Teacher in Mechanical Engineering Department for Year 2013-14 by SITCOE, Yadrav.
• Letter of Appreciation by DIPEX 2013 for project guided.
• DAB Member for Mechanical Engineering at SGM College of Engineering, Gadhinglaj 5. Reviewer of World Journal of Engineering, Emerald Publications.
• Reviewer of Materials Today: Proceedings, Elsevier Publications.
• Reviewer for AIP Journals